Assembly
Tower crane is another name for a tower crane (construction crane) that has the ability to move and lift heavy objects. After buying or renting quality tower cranes, it's time to start planning, setting up and installing. When people specializing in the installation of workshop elevators and tower cranes come into action and decide to assemble or disassemble the device, it is necessary to observe the safety points and do all the steps carefully one after the other.
Different sections of workshop elevators include:
Fixed base of workshop elevators
Height sections of workshop elevators
Workshop elevator cabins
Gearbox and motors of workshop elevators
Parachute system of workshop elevators
Electrical panel of workshop elevators
The assembly steps of the Tower Correcre
How to assemble a tower crane depends on its type and model, and its steps are as follows:
Installing the foundation and concrete base of the crane
Using a hydraulic crane (machine) to lift and move and assemble the mast and primary sections
Installation of operator cabin, balance arm and operating arm
For tower cranes that need to increase the height during the project, pine tower crane is installed.
Necessary tips after installing the Tower Correine
After setting up and installing the tower crane, the following must be paid attention to:
1_ Obtaining an insurance policy
2- Choosing an experienced and skilled operator to prevent accidents in the future.
3- Developing daily, weekly, monthly and even annual inspection plans according to the situation and conditions of the project.
Increased Tower Correcrene Element
There are several methods for assembling the tower crane, one of the methods is to assemble the tower crane at a low height at the beginning and increase its height over time by adding sections. In the same way, as the height of the building grows, the crane increases in its place.
Tower Corcer assembly methods
In situations where there is a need to connect tower cranes to a side structure, it is mostly the building that helps to build it, and as a result, assembling the tower crane requires special steps.
In dense city center locations, there is often not enough space to deploy the large mobile cranes required to install tower cranes to a sufficient height. In this situation, it is possible to increase the height of tower cranes by using climbing techniques.
What is the most appropriate method of thermonate and assembly?
To make a decision and to choose the appropriate methods of disassembly and assembly, it is desirable to visit and review the site by experts at the beginning of the work. Experts must have full and sufficient knowledge of the existing risks and conditions that may occur without incident for each of the methods of assembling the tower crane, and start setting up and installing the tower crane in the desired location with detailed planning. /p>
TAKE CORRECTER CERCERN
After finishing the construction process of the desired structures or buildings, it is time to separate and open the tower crane. Dismantling is the reverse process of assembly, and in this model, the method first separates the mast tower and then separates the remaining smaller cranes and parts. Each stage of tower crane assembly and disassembly requires high expertise, so to avoid financial losses and accidents, it is better to choose experienced and skilled experts for this important work.